AKG C 12 VR

Features:

• Classic 1-inch condenser tube performance of the original AKG C 12
• Dual diaphragm, 1" diameter gold sputtered mylar foil
• Multiple patterns remotely controlled with silent switching
• Polar patterns: omnidirectional, cardioid, and figure-8, with 6 intermediate patterns (silent switching)
• Uses the original 6072 vacuum tube
• Uses the original 1950's dual diaphragm design for sound that has the same warmth, clarity and presence of the original
• Internal microphone switching for pre-attenuation of -10, -20dB and boost of +10dB to accommodate all studio requirements.
• External (in control unit) two-position bass cut/roll-off
• Frequency response 30Hz - 20kHz (+/-2.5dB from published curves)
• Impedance: 200 ohms (+/-25%) Recommended load impedance: 1000 ohms or greater
• Output connector (from control unit): XLR (pin 2 positive)
• Output connector (from microphone): Tuchel 12-pin
• Sensitivity at 1kHz: 10 mV/Pa for all patterns; -40dB (dB re 1 V/Pa)
• Equivalent noise level (A-weighted): 22dB (DIN 45412)
• Sound pressure level for 3% THD: 128dB (equivalent to 50 Pa)
• Pre-attenuation: -10 and -20dB (at microphone)
• Sensitivity increase: 10dB (at microphone)
• Low frequency roll-off/bass cut: two-position (at control unit)
• Power requirement: 115/230 Vac Microphone
• Aluminum flight case, N 12 VR remote power supply, H 15/T elastic suspension, MK 12V R 30-foot connecting cable and W 42 foam windscreen included